Canopies

Protect your doorway or renovate your windows by installing a custom-built canopy. With many shapes like French canopies, Dutch hoods, wedge canopies, convex canopies, bow awnings, elliptical canopies and custom-built walkways, there is a style to suit all architecture and applications. Covered in either canvas or PVC, a custom-built canopy adds style, class and sophistication.

For commercial applications we do all in house signage for canopies including flat shopfront signage.

Phone us today on 03 9775 1726 to arrange a site consultation.

Get Expert Advice Quickly

Or continue reading if you want more technical information.

Solare Canopies

Below, we list some Solare canopies we have used very successfully in various applications. Some information about their products as shown below.

Canopies

Protect your doorway or renovate your windows by installing a custom built canopy. With many shapes like French canopies, Dutch hoods, wedge canopies, convex canopies, bow awnings, eliptical canopies and custom built walkways, there is a style to suit all architecture and applications. Covered in either canvas or PVC, a custom built canopy adds style, class and sophistication.

French Canopy

French canopies are a stylish addition to any doorway or window area.

Used both commercially and domestically the profile of a French canopy is fully customised to suit the architecture of its application.

Able to be made with wide spans and large projection up to 2000mm they can also provide full cover to balconies, terraces and decking / tiled areas.

Canvas and PVC are the preferred fabrics for French canopies with a signage option available for commercial applications.

Undercover Blinds French canopies are the only fully engineered French canopy available with certification on design to Australian standards. As a result of our quality of product we were asked recently to provide French canopies to the landmark historical site of Flinders street railway station.

After much investigation by Heritage Victoria and Metro, we were the obvious choice for this project due to our high standards and engineering certification.

Wedge Canopy

Wedge canopies are a stylish addition to any property. They are used as a door canopy or window canopies.

Used both commercially and domestically the profile of a Wedge canopy is fully customised to suit the architecture of its application.

Able to made with wide spans and large projection up to 1500mm they can also provide full cover to balconies, terraces and decking / tiled areas.

Canvas and PVC are the preferred fabrics for Wedge Canopies with a signage option available for commercial applications.

Dutch Hood Canopy

Dutch hoods are a traditional window canopy / door canopy with horizontal lines and slight radius profiles on the edges.

Dutch hoods can be made up to 6000mm in width and 2000mm projection and are constructed with custom bent aluminium extrusion not the often-seen cheaper alternative of cast riveted corners.

Larger can be made P.O.A.

As quite a traditional shape the Dutch hood can suitably be installed on period homes with some great results seen on modern architecture.

Canvas is the preferred fabric for Dutch hoods. As the largest manufacturer of Dutch in Victoria we offer two different radius’s of 150mm & 300mm. We have applied Dutch hoods to many heritage listed homes both state wide and interstate.

Convex Canopy

The convex canopy is exactly that – convex in shape.

It is fully custom built from extruded aluminium and can span great widths and projections up to 2000mm.

Variations on the radius can be achieved to alter the shape right down to a bullnose if required.

Bow Canopy

A bow canopy can be installed as a window canopy or door canopy.

With its radial shape a Bow canopy can give an entrance way or front façade that extra edge it might need to get away from boring!

Fully customised a Bow awning can be made to almost any size with a basic rule of thumb that the height and projection equals half the width.

Alternate sizing can be made to create flatter or elliptical shapes commonly known as elliptical canopies or eyelid canopies.

With all manufacturing done in house we can create a shape only limited by imagination.

Umbrella Bow Canopy

Umbrella Bow Canopies can be installed as a window canopy or door canopy.

With its radial shape an Umbrella Bow Canopy can give an entrance way or front façade that extra edge it might need to get away from boring!

Fully customised an umbrella awning can be made to almost any size.

With all manufacturing done in house we can create a shape only limited by imagination.

Flat Frames

Made to almost any size, the Flat Frame is the perfect addition to a commercial premise and can be dressed up with signwriting.

2 Arm Door Canopy

2 Armed Door Canopies are a stylish addition to any property. They are used as a door canopy quite similar to a Wedge Canopy but with slight curves.

Used both commercially and domestically the profile of 2 Armed Door Canopies are fully customised to suit the architecture of its application.

Canvas and PVC are the preferred fabrics for 2 Armed Door Canopies

Walkways

Walkways can be made in all shapes and sizes starting from little baby window canopies to very large and long walkways.

They are fully customised in every dimension and can be freestanding or attached to an existing structure and are made from extruded aluminium.

Preferred fabrics are canvas and PVC.

Call Now Button